FAQs

Error codes guide for All brands appliances 

What are the common Motorola washing machine error codes?

Motorola washing machines show error codes for water, motor, door, and PCB issues.

 Common **Motorola washing machine error codes** include:

* **E1** – Water inlet error

* **E2** – Drain blockage

* **E3** – Door not locking

* **E4** – Unbalanced drum

* **E5** – Pressure sensor issue

* **E6** – Heating element error

What are the common Panasonic washing machine error codes?

Panasonic machines use “U”, “H”, and “F” codes. Popular **Panasonic washing machine error codes** are:

* **U11** – Water not draining

* **U12** – Door not closed

* **U13** – Unbalanced load

* **H01/H02** – Motor malfunction

* **H04/H05** – PCB fault

* **F16** – Water sensor error

* **F23** – Overflow control

We repair all Panasonic front-load and top-load models in Nashik.

Do LG washing machines also show similar error codes?

Yes, LG washers show codes like

**IE (water inlet)**,

**OE (drain error)**, 

**UE (unbalanced)**, 

**LE (motor lock)**,

**dE (door error)** and **FE (overflow)**.

MBM Tech Services provides **LG washing machine repair in Nashik Maharashtra**.

What are the common Samsung washing machine error codes?

* **5C/5E** – Drain fault

* **UE** – Drum imbalance

* **HE** – Heater problem

* **dE** – Door error

* **3E** – Motor hall sensor issue

We provide expert **Samsung washing machine repair in Nashik** including inverter PCB repair.

Why does my refrigerator show error codes or blinking lights?

Different brands like Samsung, LG, Whirlpool, Bosch, Haier, and Panasonic display blinking lights or error codes for:

* Temperature sensor failure

* Defrost heater/thermostat issue

* Fan motor failure

* PCB communication error

* Gas leakage or low cooling

* Compressor overload

MBM Tech Services offers **refrigerator repair in Nashik Maharashtra** for all brands including side-by-side and inverter models.

**Do you repair refrigerators with internal leaks like condenser or evaporator leakage?**

Yes, we repair refrigerators with internal gas leaks, including condenser coil leaks and evaporator leaks. Internal leakage is a common issue in many modern refrigerators, especially in frost-free and inverter models. When the internal pipe gets damaged due to corrosion, moisture, or manufacturing weakness, the refrigerant starts leaking inside the insulation. This causes low cooling, continuous compressor running, ice formation issues, or complete cooling failure.

In most cases, repairing the internal coil inside the body is not possible without cutting the cabinet, which may damage the structure. Instead, our expert technicians use a safe and reliable method called **external line bypassing**. In this method, we isolate the leaking internal pipe and install a new external pipeline or a new condenser line outside the refrigerator body. This restores cooling performance without disturbing the internal insulation.

We also recharge the refrigerant, check for further leaks, and ensure complete pressure testing to avoid future problems. This solution is cost-effective, long-lasting, and commonly recommended by experienced technicians for old or leak-prone models.

If your refrigerator is cooling less or running continuously, an internal leak may be the reason. Contact us for inspection and repair.

What are common refrigerator error codes across brands?

Typical codes include:

* **E1/E2** – Sensors error.

* **E3/E4** – Defrost system issue.

* **5E/7E** – Fan motor problem.

* **rd** – Defrost or damper fault.

* **88/89** – PCB communication error.

* **HO/LO** – Temperature out of range.

We repair all refrigerator PCB and cooling system issues in Nashik.

Why is my microwave oven not heating or showing error codes?

HiMicrowave ovens show errors due to:

* Magnetron failure

* Door switch issue

* PCB failure

* Temperature sensor fault

* High-voltage capacitor or diode issue.

MBM Tech Services provides **microwave oven repair in Nashik** for Samsung, LG, IFB, Panasonic, Godrej, and all brands.

What are common AC (Air Conditioner) error codes?

HiBrands like Samsung, LG, Whirlpool, Carrier, Daikin, Blue Star, and Voltas show codes for:

* **E1/E2/E3** – Indoor/outdoor sensor issues

* **CH05** – Communication error

* **U4/U5** – Outdoor unit power supply error

* **P2** – Low gas / overload

* **H3** – Compressor overload

* **F0** – Low refrigerant

We provide **AC repair in Nashik**, including inverter AC PCB repair and gas refilling.

Why does my air conditioner stop cooling or show blinking lights?

* Low gas

* Blocked condenser

* Faulty indoor/outdoor PCB

* Fan motor failure

* Thermistor issue

* Overheating of compressor.

MBM Tech Services Nashik handles **AC service, deep cleaning, PCB repair, and gas filling**.

Do you repair appliance PCBs for all brands?

* Air conditioner inverter PCB

* Washing machine PCB

* Refrigerator PCB

* Microwave oven PCB

* Smart inverter board repair for Samsung, LG, Panasonic, Bosch, Whirlpool, Onida, IFB & more

We repair short circuits, blown components, relay faults, sensor circuits, and communication errors.

Why choose MBM Tech Services for appliance repair in Nashik?